Deck Builders in Buckfield, ME
Deck builders in Buckfield, ME work on old capes and farmhouses, an estimated 288 from 1939 or earlier, and on newer homes behind a median build year of 1983. On either, we test the old frame before pricing.
- (207) 386-9863
- 217 Main St, 3rd Floor, Lewiston
- [email protected]
- Decks only, start to finish
- Free estimate requests
- 22 towns around Lewiston-Auburn
This page covers deck building, deck replacement and deck repair in Buckfield, Maine, in composite, PVC or pressure-treated wood. It speaks to owners of the older capes and farmhouses around Buckfield Village, the ranches built in the 1970s and 1980s, and houses on lots along the Nezinscot River.
Deck Builders Lewiston tests the old frame before pricing, sets footings 4 feet down and keeps each new deck inside the 25-foot setbacks Buckfield applies to decks and steps. When a frame is still sound, we say so and price the repair.
The figure to keep: about $84 per square foot is the Buckfield average for a pressure-treated deck, and $15,000 is where composite or PVC begins, each drawn from many quotes rather than quoted for your house.
Why Does a Buckfield Deck Need the Town's 25-Foot Setbacks?
A Buckfield deck needs the town's 25-foot setbacks because the Building Permit Ordinance counts decks and steps as structures, and structures stay 25 feet from the road edge and every lot line.
- Older capes and farmhouses near Buckfield Village
- 1970s and 1980s ranches
- Lots along the Nezinscot River
Get your free estimate request sent in 60 seconds!
Prepare your request below, then send it from your email app. Or call (207) 386-9863.
Which Towns Near Buckfield Are Also on Our Route?
See all 22 towns we serveWhat kind of decks do we build in Buckfield, ME?
Three jobs cover most Buckfield deck work.
Deck Replacement Behind Buckfield's Older Capes
Deck replacement is usually the honest call behind an older cape patched board by board, because by then a wood deck is done. Buckfield lets a demolished non-conforming structure be rebuilt where its setbacks match or beat the old ones, so we measure before tear-out.
We open the siding where the ledger (the board bolted to the house) goes, since bolts can pull out of a water-damaged band joist.
Composite Decks for Buckfield's 1980s Homes
Composite decks fit the town's 1970s and 1980s ranches for owners done with stain, and TimberTech does not recommend staining its boards. Trex voids its warranty if a coating goes on.
Snow is the test: West Paris, next door, averages 72.9 inches a year, and Trex says to shovel its boards with plastic, never metal.
If staining is a trade you are willing to make for a wood surface, treated-wood decks remain an option.
Deck Repair Where a Buckfield Frame Holds Up
Deck repair makes sense when a stair has pulled loose or a few boards are soft over joists that test solid. Every fresh cut in treated wood gets copper naphthenate, as the American Wood Council's DCA 6 directs.
Buckfield's permit ordinance exempts ordinary repairs, but Maine's adopted code does not count cutting a beam or a load-bearing post as ordinary. Once rot reaches the joists or the ledger, we price a replacement.
A rail system that needs replacing gets its own deck railing plan, after we check the post connections.
What Deck Services Do We Offer in Buckfield?
Buckfield deck jobs use some mix of these.
Buckfield's Building Permit Ordinance wants a site sketch measured to the boundaries, the road and any high-water mark. We draw and file it, and approval is the town's call.
- New decks and full replacements on new footings
- Composite, PVC or treated boards and stairs
- Board, stair and guard post repairs on a sound frame
How to Take a Buckfield Deck From First Visit to Final Walk
Lines, wall and old deck.
We tape the setbacks, check where a ledger would go and probe the old deck with a screwdriver.
Paper before lumber.
The price is written and the contract signed before we order anything, with a third down at most.
Frame first, then what shows.
Piles and a taped frame go in before decking or rail, and the last step is walking the deck with you.
How Do You Choose Deck Builders in Buckfield, ME?
Choosing deck builders in Buckfield, ME comes down to their plan for the old frame: replace it, or lay boards on it? We replace it, since the frame is the cheapest part of a deck and every board depends on it.
Buckfield's ordinance sets no frost depth that we have found, so make the builder commit to one: ours is 4 feet, usually on helical piles screwed in to a set torque.
Then hold the job to Maine's contract statute: over $3,000, a written contract both sides sign, and no more than a third down.
Who Should Plan a Buckfield Deck, Where, and When?
Who in Buckfield should plan a replacement soon?
The Buckfield owners who should plan soon have a wood deck gone spongy or patched with new boards among old, a sign it is done.
Where in Buckfield do water rules come into play?
Water rules come into play near the Nezinscot River and its branches, where the permit ordinance adds Buckfield's shoreland rules. Under Maine's shoreland zoning, that zone reaches 250 feet from a river's high-water line, and we confirm the town's setback first.
When should a Buckfield deck be built?
A Buckfield deck belongs in the warm months, with footings set before the ground freezes. A permit stays good three years, and skipping one can bring a fine of up to 10 times the fee.
How Much Does a Buckfield Deck Cost to Build?
A Buckfield deck costs about $84 per square foot to build in simple pressure-treated form and $105 to $126 per square foot with levels, angles or more stairs, both averages of many quotes. Project floors sit at $10,000 for treated wood and $15,000 for composite or PVC.
| Deck | Average |
|---|---|
| Pressure-treated, simple layoutone level, a few steps, treated boards and rail | about $84 per sq ft, nothing new under $10,000 |
| Bigger or more complex layoutlevels, angles, wraparounds, tie-ins, more stairs | $105 to $126 per sq ft |
| Composite or PVCcomposite or PVC boards with composite rail | from $15,000 |
Installed Buckfield averages from many quotes, not a bid, for footings, framing, decking, rail and stairs. Height or old rot can move them, and smaller decks cost more per foot.
Why does a Buckfield 10x10 cost more per foot?
A Buckfield 10x10 costs more per foot because it needs nearly the footings a bigger deck does, and footings weigh heavy on a small job. The 12x16 often adds only about $1,000.
Which parts of a Buckfield job cost the most?
A ramp costs the most on a Buckfield job, and the town's Board of Appeals may grant a setback variance for disability access. Stairs come next, then missing footings and the layout's shape, with height last: about one crew day of staging past 2 feet or so.
Why is deck repair left unpriced here?
Deck repair is left unpriced because it turns on which boards or stairs are bad and whether the frame beneath is sound. Once a deck nears 20 and is patched board by board, or its joists are soft, we point you to a replacement.
Ready to Have a Buckfield Deck Measured and Priced?
Send the free estimate request, and we will measure the lot and check under the old deck first.